Extron electronic - PMK 150

Below are all the different types of Extron electronic. Select the device of your choice, to download the manual

Contents

PMK 150 Installation Guide The Extron PMK 150 Pole Mount Kit is a simple solution for mounting Extron devices and their external power supplies to a projector pole The PMK can be installed on a Vh inch pipe within a 4 inch space between the projector and the ceiling Including the power supply the following devices can be mounted one three inch deep half rack device or two 3 inch deep quarter rack devices or Figure 1 PMK 150 Parts an MPA 401 Figure 1 shows the parts that are included in the kit CAUTION The maximum load for the PMK 150 is 5 lbs 2 25 kg NOTE The PMK 150 is to be used only with Extron UL listed products Installation NOTE Ensure the finished installation is in accordance with local and national building codes ...